Check the Door Lock Switch. Washers will not run if the door or lid is not closed.
Rebalance the Load. Another simple problem that can stop the washer from draining is an unbalanced load.
Drain Your Washer Manually.
Clean the Drain Filter.
Inspect the Drainage Hose.
Check That the Drain Pump Is Working.
How do I get my LG washer to drain and spin?
For LG front load washers, turn the unit on and without touching the selector dial move to the spin speed selection button. Next, press the button until you see your desired spin speed highlighted. Then press the Start button. The unit will drain any excess water before it spins.
What would cause a washer to not spin or drain?
The drainage is poor
Normally, your washing machine won’t go into a spin cycle until it’s been drained. The drainage hose may become clogged with debris from your clothing, or it could be kinked. If the hose is kinked or crushed, it will likely need to be replaced.
How do I test my LG washing machine drain pump?
Press POWER to turn the washer ON. Press the SPIN SPEED key until HIGH is selected. Press the START/PAUSE button to start the SPIN ONLY cycle. Listen to hear a humming sound which indicates that the drain pump motor has started working.
How do I fix my LG washer that won’t drain? – Related Questions
Why is my spin and drain not working?
One of the most common reasons why your washing machine has stopped spinning is when it can’t drain properly due to a blocked drain pump. This can happen when something gets stuck in the outlet pipe, preventing the steady flow of water in and out of the machine.
How do I know if my drain pump is clogged?
Remove the drain hose by unscrewing the clamps holding it to the pump outlet. Look for blockages inside the hose, says Family Handyman. If you don’t see any, the pump may be blocked or faulty. To check it, you have to disconnect the belt connecting it to the drive motor.
How do I test my washing machine drain pump?
How do I know if my washing machine drain pump is clogged?
How do I know if my washing machine pump is clogged?
What to Look Out For. The number one sign of a clogged drain affecting your washing machine is finding water inside the unit after the washing cycle is complete. During the cycle, water is flooded into the chamber of the machine, mixing in with the detergent to clean your clothing.
How do I put my LG washer in test mode?
How do you do a hard reset on an LG washing machine?
What are common problems with LG washing machines?
However, like all washers, LG washers are still prone to wear and tear. The most common issues with LG washers relate to the washer not draining, wires breaking, or excess water caused by a defective water inlet valve.
Washer Not Draining.
Broken Motor Wire Harness or Position Sensor Wire.
Washer Overfilling or Leaking.
How do you run a diagnostic test on a washing machine?
What is the most common fault on a washing machine?
A washing machine not draining is one of the most common problems we encounter. It can be caused by one of the following: – The drain hose or pump is clogged with a small item of clothing, residual gunk or other debris. – The washer is malfunctioning and not engaging the drain/spin cycle properly.
How do you hard reset a washing machine?
What is LG Smart Diagnosis washing machine?
What is the life expectancy of an LG washing machine?
Washing machines, on average, last around 10 years, according to Consumer Reports. If your washer is reaching the threshold, or it’s been having some problems, here are some signs the end may be near.