What Size Drill Bit for 3/8″ Tap? For a 3/8″ tap, the drill bit should be 5/16″ in diameter and is usually 6 inches in length.
What size tap do I need for a 3/8 bolt?
Contact us for more information.
Tap and Drill Size Chart.
THREADSIZE |
DRILL DIAMETER Coarse Thread |
TAP DRILLSIZE |
3/8-24 |
.3320 |
‘Q’ |
7/16-20 |
.3906 |
25/64 |
1/2-20 |
.4531 |
29/64 |
9/16-18 |
.5156 |
33/64 |
What are the 3 types of taps?
Tapping tools are divided into four types: straight flute tap, spiral point tap, spiral fuse tap and forming tap.
What is the tapping drill size for a 3/8 BSF thread?
BRITISH STANDARD FINE
SIZE |
TPI |
DRILL SIZE |
5/16 |
22 |
6.75 |
3/8 |
20 |
8.33 |
7/16 |
18 |
9.53 |
1/2 |
16 |
11.11 |
What size drill bit do you use for a 3/8 coarse thread tap? – Related Questions
What is the standard 3/8 thread?
Standard Thread Pitch Chart
Coarse Thread Series – UNC |
Fine Thread Series – UNF |
Nominal Size and Threads Per In. |
Basic Pitch Dia. |
Nominal Size and Threads Per In. |
3⁄8 – 16
|
0.3344 |
3⁄8 – 24 |
7⁄16 – 14 |
0.3911 |
7⁄16 – 20 |
1⁄2 – 13 |
0.45 |
1⁄2 – 20 |
What is the diameter of 3/8 thread?
What size drill bit should I use for a 3/8 lag bolt?
Similar to wood screws, a stepped pilot hole is recommended for lag bolts. The pilot hole for the body (the unthreaded section of the shank adjacent to the head) should match the bolt size (3/8″ hole for a 3/8″ bolt, for example).
What size pilot hole should I drill for a 3/8 inch lag bolt?
Pilot Hole Diameter for Lag Bolts
Bolt Dia |
Shank (Unthreaded) |
Pilot Hole Dia |
3/8 |
3/8 |
15/64 |
7/16 |
7/16 |
9/32 |
1/2 |
1/2 |
5/16 |
9/16 |
9/16 |
23/64 |
What drill is used to tap a 3/8 18 NPT hole?
Drill Size
1/16-27 NPT(F) w/o Reamer |
C |
1/4-18 NPSF |
7/16 |
3/8-18 NPT(F) w/o Reamer |
9/16 |
3/8-18 NPT(F) w/Reamer |
9/16 |
3/8-18 NPSM
|
.603 |
What thread pitch is 3/8 NPT?
Basic Dimensions, American National Standard Taper Pipe Threads, NPT, (ANSI B2. 1-1968)
Nominal Pipe Size |
Outside Diameter of Pipe |
Pitch Diameter at Beginning of External Thread |
1/16 |
0.313 |
0.27118 |
1/8 |
0.405 |
0.36351 |
1/4 |
0.540 |
0.47739 |
3/8 |
0.675 |
0.61201 |
What is a 3/8 drill bit equal to?
Drill Bit Hole Diameters |
Metric Size |
Fractional Size |
14 mm |
.5512 |
23/64 |
15 mm |
.5906 |
3/8 |
16 mm |
.6299 |
25/64 |
Whats the difference between a 1/2 inch and 3/8 inch drill?
The more powerful the drill the more durable it is. As we saw earlier, a ½” drill has more torque and is, therefore, more powerful. This makes ½” drills more durable than ⅜” drills. If you are purchasing a drill based on durability alone, a ½” is the best option.
Which is bigger 3/8 or 5/16 drill bit?
In order to compare the two fractions, they must have a common denominator, 16. 3/8 is larger than 5/16.
How do you drill a 3/8 hole without a drill?
The best way to drill a hole without a drill is to take a nail or an awl, and hammer it into the material. Then pull the awl or nail out of the material, and use the hole as intended.
Is a 3/8 drill bit 10mm?
10mm Drill Bit (~3/8″)
What size do you drill for a 10mm tap?
Metric Tap and Drill Bit Size Table
Tap |
Metric Drill |
US Drill |
10mm x 1.5 |
8.7mm |
– |
10mm x 1.25 |
8.9mm |
11/32″ |
10mm x 1.0 |
9.1mm |
– |
12mm x 1.75 |
10.5mm |
– |
What size hole do I drill to tap M10?
Fine Thread
Size |
Pitch |
Drill |
M10 |
0.5 |
9.5 |
M10 |
0.75 |
9.25 |
M10 |
1 |
9 |
M10 |
1.25 |
8.75 |
What fraction is a 10 mm drill bit?
7mm = almost 9/32 inch (= a bit over 1/4 inch) 8mm = 5/16 inch. 9mm = almost 3/8 inch. 10mm = just over 3/8 inch.
Is a 1/4 drill bit 6mm?
6mm Drill Bit (~1/4″)